BharteeINDUSTRIESinquiry@bharteeindustries.inStart inquiry

STRUT FITTINGS · 9 APPROVED PRODUCT TYPES

Strut Channel Fittings and Mounting Accessories

Bhartee Industries supplies connection plates, channel nuts, spring nuts, stud-and-channel-nut assemblies, mounting plates, floor mounts and drawing-based fittings for 41 mm strut systems. Each inquiry keeps standard plate geometry fixed and asks only for the compatible channel, thread, mounting bolt, orientation or custom dimensions relevant to the selected fitting.

Configure productsReview specifications
Strut channel connection plates and mounting fittings
Approved Strut Channel Fittings range

TECHNICAL SUMMARY

What to include in the inquiry

Use the applicable drawing and governing standard as the final authority. Other / Custom keeps unusual requirements inside the same RFQ.

Connection fittingsCross / 4-Way, Elbow / 2-Way and Tee / 3-Way plates
Threaded accessoriesChannel nuts, spring nuts and studs with channel nut
Mounting supportsChannel with mounting plate and four-hole floor mount
Compatible channel41 × 41, 41 × 21 or Other / Custom
Standard plate thickness4 mm on defined plate products
Quantity unitPieces
Custom workflowDimensions, hole pattern and drawing reference captured before drawing is emailed

RANGE OVERVIEW

Complete the strut assembly with compatible fittings

Choose the fitting by connection or mounting function, then confirm channel compatibility and the threaded hardware required for the assembly.

Cross, Elbow and Tee Plates

4 mm standard connection plates with M10, M12 or custom mounting-bolt selection.

View details

Channel Nuts and Spring Nuts

M6 to M16 threads for compatible 41 × 41 or 41 × 21 channel profiles.

View details

Mounting and Stud Assemblies

Studs with channel nut, projecting channel with mounting plate and vertical floor mounts.

View details

Strut Channel Profiles

Slotted, non-slotted, Galvalume and custom channel supplied by total metres.

View details

PLATE GEOMETRY

Do not ask buyers to re-enter standard plate thickness

Cross, elbow, tee, mounting-plate and floor-mount products use the approved 4 mm standard plate. Custom thickness appears only on the drawing-based fitting form.

COMPATIBILITY

Keep channel profile and thread size visible

The form separates 41 × 41, 41 × 21 and Other / Custom channel compatibility. Channel nuts, spring nuts and stud assemblies retain their thread size as an explicit field.

SYSTEM REVIEW

Confirm the complete support arrangement

Fitting geometry identifies the requested component but does not establish support load or anchor capacity. Confirm the channel, fasteners, anchors, spacing and installation against the approved project design.

CONTINUE THE SPECIFICATION

Related products and references

Cross, elbow and teeConnection PlatesThreaded channel accessoriesChannel & Spring NutsStud, plate and floor mountingMounting SupportsSelect the supporting profileStrut Channel

BUYER QUESTIONS

Frequently asked questions

What plate thickness is used for standard fittings?

The approved standard cross, elbow, tee, mounting-plate and floor-mount products use 4 mm plates.

Which channel sizes are supported?

The approved compatibility choices are 41 × 41, 41 × 21 and Other / Custom.

Can anchors be added with a mounting fitting?

Compatible channel nuts, spring nuts and wedge anchors can be suggested for the applicable mounting products, but the complete support system must be confirmed.

BUILD ONE MULTI-ITEM RFQ

Ready to specify your fastener list?

Add multiple sizes, review compatible items and provide buyer and delivery details only once at the end.

Prefer email? inquiry@bharteeindustries.in

Open inquiry builder