External · DIN 471
Retaining rings installed in a groove on a shaft.
BharteeINDUSTRIESinquiry@bharteeindustries.inStart inquiryCIRCLIPS · SHAFT, BORE AND E-TYPE RETENTION
DIN 471, DIN 472 and DIN 6799 Circlips
Circlips provide axial retention in a shaft or bore groove. The range includes external rings to DIN 471, internal rings to DIN 472, bearing applications using the applicable shaft or bore configuration, and E-type retaining washers to DIN 6799.
- External and internal rings
- Bearing and E-type options
- Standard groove guidance
- Pieces-only quantity
TECHNICAL SUMMARY
What to include in the inquiry
Use the applicable drawing and governing standard as the final authority. Other / Custom keeps unusual requirements inside the same RFQ.
External circlipsDIN 471 shaft installation
Internal circlipsDIN 472 bore installation
E-type retaining washersDIN 6799 radial installation
Bearing circlipsExternal or internal installation plus application reference
Standard guidanceGroove diameter and width populated for supported sizes
Material / hardnessProduct-specific spring steel, stainless and Other / Custom
FinishPhosphate and oil, zinc options, self finish or Other / Custom
Quantity unitPieces
INSTALLATION TYPE
Start with shaft, bore or radial installation
The installation identifies which nominal dimension and groove data matter. Keep external, internal and E-type requirements separate even when their nominal numbers appear similar.
Internal · DIN 472
Retaining rings installed in a groove inside a housing or bore.
Bearing application
Select shaft or bore installation and record the bearing or assembly reference.
E-type · DIN 6799
Radially installed retaining washers for the selected nominal groove size.
STANDARD LOOKUP
Review groove guidance from the selected size
The inquiry displays the supported groove diameter and groove-width guidance after the installation type and nominal size are selected. The current governing standard and approved assembly drawing remain the final authority, particularly where edition changes affect dimensional limits or corrosion-protection designations.
MATERIAL AND FINISH
Specify the spring material and corrosion protection
Approved options include carbon spring steel, a stainless selection and Other / Custom, with product-specific phosphate, zinc or self-finish choices. Confirm the material, hardness, finish and inspection requirement for the service environment.
APPLICATION DETAIL
Retaining capacity depends on the complete groove system
A nominal ring size alone is not a complete engineering selection. Shaft or bore material, groove geometry, edge distance, axial loading and assembly constraints should be reviewed by the responsible designer before ordering.
BUYER QUESTIONS
Frequently asked questions
What is the difference between DIN 471 and DIN 472?
DIN 471 covers retaining rings for shafts, while DIN 472 covers retaining rings for bores. Their installation and groove requirements are different.
Does the inquiry calculate the groove dimensions?
It provides supported standard lookup guidance for the selected type and nominal size. The current standard and approved assembly drawing remain the final authority.
Are E-type circlips the same as external circlips?
No. E-type retaining washers are radially installed and are configured separately under DIN 6799.
BUILD ONE MULTI-ITEM RFQ
Ready to specify External Circlips?
Add multiple sizes, review compatible items and provide buyer and delivery details only once at the end.
Prefer email? inquiry@bharteeindustries.in